Launch 5 Electrical Systems
Paneltronics
Breaker Panels
Wiring: 250 12/2 and 500' 14/2 Rubber Marine Wire
The Electrical Systems in Launch 5 were
designed and procured by Jerry Mack from Echo Bay Marine Services and installed
by Jerry and his partner (and Launch 5 crew member) Lynn Valenti. The many hours
of work that went into this system were donated by Echo Bay Marine Services
((914)636-3061.
Read some insights on the design written by
Jerry Mack
|
click for larger image
|
Paneltronics
Model 5401 AC/DC 21 Bkr Main Panel
Designed with flexibility and
expansion in mind, this panel controls all the DC needs of the vessel
except bilge pumps (see below). It will also serve as the distribution
system for AC shore power. |
|
click for larger image
|
Paneltronics
Model 2203 Bilge Pump Panel
For safety and convenience, all
of Launch 5 bilge pumps are controlled from a separate sub-panel. This
allow easy power down of most of the vessel from the main panel while
still leaving the bilge pumps powered up. |
click for a larger image
|
AC Power
Distribution Panel
(part of 5401 main panel)
Installed for future addition of
120VAC shore power. |
|
Send comments, inquiries and questions to
info@Launch5.com
Copyright ©
2003-2007
Launch5.com
|
|
 |
Web site by BS
artist Last
modified: December 29, 2005
